If you’re amid the average American households who shell out more than $2,000 every year on heating and cooling expenses, adding a smart thermostat is a fantastic approach to keep utility bills under control. Although mosthomes rely on programmable thermostats, yours probably isn’t being made the most of since it’s on “hold” permanently.
When getting a new thermostat, the Nest smart thermostat is one of the top sellers. That’s due to the fact it learns your temperature preferences and schedule, and then makes an energy-efficient schedule to match. You can also check and lower it from almost anywhere with your smartphone.
For the average home, Nest says its thermostat saves about 10-12% on heating costs and about 15% on cooling costs. That’s about $131 to $145 saved each year, which helps the thermostat pay for itself in under two years. And the majority of utility businesses offer rebate programs that help you get a smart thermostat for free or close to it.
When you’re upgrading to a smart home thermostat, you’ll want to make sure it works with your HVAC system. This is especially important if your equipment is getting old. If it’s not, you might have problems, like erratic furnace or air conditioner behavior. That’s why it’s essential to have a professional like Fal-Ken Heating & Cooling Corporation help you select a new thermostat and take care of your smart thermostat installation.
Here’s how to figure out if the Nest is compatible with your HVAC system.
Nest Runs with Many Heating and Cooling Systems
The good news is that Nest made its thermostat to operate with many different 24-volt systems, including older ones.
This includes heating and cooling systems powered by:
- Natural gas
- Oil
- Electricity
Before you buy a Nest, you can put your details into the Compatibility Checker to provide an easy transition. Once you’ve checked it will work, your Nest will work you through compatibility and wiring when you set it up.
The Nest Learning Thermostat is compatible with the widest range of home comfort units, including heat pumps, furnaces and air conditioners. It also runs with extremely energy-efficient multistage systems, dual-fuel equipment, humidifiers and dehumidifiers, but you’ll often need a professional like Fal-Ken Heating & Cooling Corporation to do the in-depth wiring and setup procedures.
Does the Nest Require a C-Wire?
If you’ve done research on the Nest, you’ve potentially run into details about the C-wire, or common wire. This wire energizes your smart thermostat when it can’t draw adequate power from the other wires.
If you don’t have a C-wire, it’s likely still all right to use a Nest. The company says its thermostats were created to use not much power. In most cases, this means they can work correctly without this wire.
Have a smart thermostat without a C-wire and noticing erratic heating and cooling behavior? An HVAC pro like Fal-Ken Heating & Cooling Corporation can put in a C-wire for you.
Our Experts Make Smart Thermostat Installation Simple
Getting a new thermostat makes it a snap to stay on top of your heating and cooling costs while keeping your {house|residences|home comfortable. If you want to add a Nest smart thermostat to your residence, Fal-Ken Heating & Cooling Corporation can help you find the right model for your budget and then expertly install it. Reach us at 631-460-5159 to get started now!