When your furnace won’t start, doing your own furnace repair in Holbrook, New York, can feel pretty overwhelming.
Figuring out a furnace-related problem might feel like a daunting process when your heat won’t turn on. But it doesn’t have to be like that.
There are several time-saving, inexpensive fixes you can do yourself to skip a furnace repair call.
If your furnace won’t turn on, won’t stay on or won’t ignite, try the troubleshooting list below before contacting an HVAC professional.
If you find you need help from a heating and cooling pro and live in Holbrook, Fal-Ken Heating & Cooling Corporation can provide assistance to you. We can repair most types of heating systems and also provide emergency furnace repair.
If it’s time for a new heating system, we also provide furnace installation.
While you’re in touch with us, think about a regular furnace maintenance plan that could help you avoid repairs in the future. We can tell you how frequently your furnace should be examined by one of our certified professionals.
Use our easy guide below to get started on troubleshooting your furnace. Most of these steps don’t require mechanical skills.
Furnace Repair Checklist
1. Check the Thermostat
To start, make sure your thermostat is signaling your furnace to ignite.
Digital Thermostat
Replace the batteries if the screen is blank. If the digital screen is jumbled, the thermostat may need to be replaced.
Make sure the switch is set to “heat” instead of “off” or “cool.”
Ensure the program is displaying the appropriate day and time and is set to “run.” If you’re having problems overriding the program, set the temperature by using the up/down arrows and press the “hold” button. This will cause the furnace to start if thermostat programming is causing an issue.
Increase the temperature setting to 5 degrees warmer than the room temperature.
If your furnace hasn’t kicked on within few minutes, make sure it has power by toggling the fan switch from “auto” to “on.” If the fan doesn’t start, your furnace could be without power.
Smart Thermostat
If you have a smart thermostat—like one made by Nest, Ecobee, Lux, Honeywell or Bosch—troubleshooting is very model-specific. Refer to the manufacturer’s website for help. If you still can’t get your Wi-Fi thermostat to work, call us at 631-460-5159 for heating and cooling service.
2. Examine Breakers and Switches
Next, you will need to check if your breaker and furnace switch are on.
Locate your house’s main electrical panel. If you don’t know where it is, look for a gray metal box in your basement, garage or closet.
Make sure your hands and feet are dry before touching the panel or breakers.
Locate the breaker labeled “furnace” or “heat,” and make sure it’s switched “on.” If the breaker has tripped, it will be in the middle or “off” position.
Using one hand, firmly switch the breaker to the “on” position. If the breaker immediately trips and pops back to “off,” don’t touch it and contact a professional from Fal-Ken Heating & Cooling Corporation at 631-460-5159 right away.
It doesn’t matter how old your furnace is or what brand it is, it has at least one standard wall switch located on or near it.
Make sure the switch is flipped up in the “on” position. If it was turned off, expect your furnace to take up to five minutes to start. (If you don’t know where to find your furnace, take a look at your basement, garage or utility closet. It could also be in a crawl space or attic.)