No matter what your HVAC questions are, the pros at Fal-Ken Heating & Cooling Corporation in Holbrook have answers. Whether you have questions about picking new HVAC equipment to best practices on care and maintenance, we are here to help. Our online FAQs answers give you a fast response for your convenience, but if you want to know more on any topic, don’t hesitate to give us a call at 631-802-6021.

Just like you need to take your car in to the shop for normal tune-ups, such as oil changes or looking at probable problems, your home comfort system should receive the same kind of attention. Routine maintenance by a professional technician provides numerous benefits to your HVAC equipment, which can help your systems perform efficiently and prevent costly breakdowns.
The cost can fluctuate depending on the equipment size and different features, so we recommend contacting Fal-Ken Heating & Cooling Corporation at 631-802-6021 to get a quote.
Two-stage heating enables the furnace to heat at two levels of output: high for cold winter days and low for mild ones. Around 80 percent of the time, your homes heating requirements can be met when the furnace is set on the low setting, allowing your two-stage unit to operate for longer periods of time. Two-stage units also give more even heat distribution, fewer temperature swings, quiet operation, better air filtration and energy efficiency.
Fal-Ken Heating & Cooling Corporation has a variety of brands and models that are more efficient than ever and make it easier to find the best match for your home. There are innovative systems that make heating or cooling your home more automatic, functioning similar to cruise control to make small adjustments to help meet your comfort demands with energy efficiency. Give us a call at 631-802-6021 to learn more about the technology we provide.
Depending on how old your previous furnace was, you could experience a number of differences. Furnaces today are created to provide more even and efficient heating than ever before. Modern furnaces also better regulate temperature and air flow, moving more air over the heat exchanger than older furnaces.

Additionally, new furnaces are crafted to integrate with other high-efficiency HVAC products, such as air conditioners. The air conditioner blowers offer your heating system an extra bump so it can deliver cool air around your home efficiently. Special features like variable speed motors will also help reduce noise associated with operating your equipment and easily meet your family’s airflow needs.

The Department of Energy recently boosted the minimum efficiency levels for air conditioners, heat pumps and packaged units created after Jan. 1, 2015, since heating and cooling contributes significantly to a homes total energy usage. The requirements vary by region, so call Fal-Ken Heating & Cooling Corporation for the efficiency standards for Holbrook.
Fal-Ken Heating & Cooling Corporation carries a number of HVAC products with high-efficiency ratings, which can help lower the amount of energy they require to operate. Aside from selecting products that have received Energy Star® certification or achieved high SEER ratings for air conditioners or AFUE ratings for furnaces, you can consider the following:

  • Making certain that your system receives regular maintenance by a trained technician can keep your system operating at its top performance.
  • Zoning systems enable you to heat or cool only certain areas of your home, so you wont have to pay to heat or cool spaces that you aren’t using.
  • Having a programmable thermostat allows you to set the temperature in your home around your schedule. They can be programmed to give you the comfort you want when you’re home and increase or decrease the temperature while you’re not around, helping you save on heating and cooling costs.
Fal-Ken Heating & Cooling Corporation is well-known in the Holbrook area and you can depend on them to provide quality home comfort products. We offer a variety of innovative and high-quality products. We are dedicated to giving customers high-quality service and will make sure you find the right solution for your home.
Improving your home’s indoor air quality starts with four basic strategies:

    • Poor indoor air quality leaves your home full of air pollutants floating around. So, to improve IAQ, the first step is to get rid of as many pollutants as possible. You can easily do this by cleaning and vacuuming at least one time during the week, frequently washing linens and storing cleaning products safely.
    • Proper insulation is great for keeping your home warm in the winter and cool in the summer, but it also makes it difficult for airborne pollutants to escape. We offer products that help swap stale air for fresh, filtered outside air.
    • Good ventilation and ongoing cleaning are a start, but air filters, germicidal lights and purification systems take your IAQ to the next level by capturing microscopic particles, killing germs and getting rid of particles while destroying chemical vapors.
    • Programmable thermostats will help control the humidity levels and temperature to help avoid particles and germs from building up while also keeping your home comfortable.

We recommend that you meet with one of the experts at Fal-Ken Heating & Cooling Corporation and have them perform an evaluation of your home and current indoor comfort system. We can help you decide which equipment will be best suited to meet your needs.

Lots of homeowners believe that air conditioners make the air in your home cooler, but it actually removes the heat from your home, sending the hot air outside. That hot air goes across a cold indoor coil where refrigerant in the lines sends the heat to the coil in your outdoor unit, releasing it outside. This procedure continues until the indoor temperature reaches the temperature you set on your thermostat.
Due to the high amount of energy used by heating and cooling systems, the Department of Energy (DOE) hiked up the minimum efficiency levels for air conditioners, heat pumps and packaged units manufactured after January 1, 2015. These levels are determined based on region and carry varying requirements based on your location. Fal-Ken Heating & Cooling Corporation will be able to answer any questions you may have regarding these minimum requirements and let you know what choices are available when you’re in the market for a replacement system.
These numbers can be found on a nameplate or sticker that is near your systems service panel. The sticker should be white with black letters and have both of these numbers located near the top of the sticker. M/N signifies model number while S/N is your serial number.
There are a couple ways to determine what size system will best suit your home, but the most reliable way to determine the right size system is by having your local Fal-Ken Heating & Cooling Corporation technician come out and perform a load calculation. This calculation considers your homes: square footage, insulation value, amount of insulation, and a number of other factors.
The short answer is Yes, because dirt and other debris can hinder your systems ability to work efficiently. For heat pumps, it is common to have frost or ice on them during the winter, but they also feature defrost controls to ensure they work efficiently in that type of weather.
Two-stage cooling means that your cooling unit has two levels of operation. When summer is its hottest, the high setting is used, and when its cooler or more mild, the low setting gets the job done. Most of the time, the lower setting can take care of your cooling needs, but even when the high setting is in use, you may not realize it because it can generate such even temperatures for your comfort. This may also mean a quieter cooling system, greater efficiency and better humidity control.
When your cooling unit freezes up, there are a number of reasons why it could be doing so. The most common reasons include: dirty filters, low refrigerant, a dirty evaporative coil and a faulty blower motor or relay. A dirty filter is something you can change as a homeowner, but the others need to be fixed by a professional like those at Fal-Ken Heating & Cooling Corporation. Contact them at 631-802-6021 with any additional questions.
Identifying the best thermostat for your cooling system comes with a lot of considerations. Thats why its nice to have such a wide variety of choices from Fal-Ken Heating & Cooling Corporation. Whether you’re searching for a programmable or non-programmable thermostat or want to join the smart home trend, there are a variety of thermostats that you have to select from. Some thermostats will depend on what type of heating and cooling system you have, but the team at Fal-Ken Heating & Cooling Corporation will be able to help determine what options meet your needs and your budget.
Heat pumps can be a tad confusing due to their name, but they actually take care of both your heating and cooling needs year-round. When its hot outside it works like an air conditioner in that it removes heat from your home, but when it cools off, the process gets switched around and it collects heat from outside and brings it inside. Heat pumps are also very efficient, and may produce up to two or three times more heat than the energy it uses.

Of course we suggest you also replace your indoor system, but this is why:

      • All outdoor cooling systems have a matching indoor unit that they are created to work with to ensure efficient performance. When they aren’t paired with the other part as a total system, efficiency might suffer.
      • As with many products, advancements have brought about newer, more efficient ways of doing things. Heating and cooling systems are no different. These developments most importantly include greater heating and cooling efficiency, but also consist of improved air handling, filtering and noise pollution reduction to name a few.
      • Heating and cooling systems that are more than 10-15 years old usually need to be replaced. Not only do they feature outdated technology, but they are also less efficient than todays models. Buying a new indoor unit at the same time means you’ll have a matched system to provide you with improved comfort and efficiency for years to come.
The communication module on your home energy system may send the system’s performance records for each module to a website. You can visit this website to learn more about the system’s status, energy production and environmental benefits. The site also displays carbon offsets as it happens.
In most areas, rain will clean the solar modules off automatically. If you live in a dusty or industrial area, periodically spraying the modules with water may help improve performance. However, detergents and high-pressure hoses should never be used to wash solar modules.
The best thermostat for you depends on your heating and cooling equipment. Fal-Ken Heating & Cooling Corporation sells programmable and nonprogrammable thermostats that can help enhance the efficiency of your HVAC systems. Check out our available products or contact us at 631-802-6021 to learn more.
Heating and cooling can make up a large part of your utility bill. The innovative and high-efficiency heating and air conditioning products available from Fal-Ken Heating & Cooling Corporation can help decrease these costs. If you’re searching for a new heating or cooling system, look for products with high SEER ratings for air conditioners and AFUE ratings for furnaces. SEER and AFUE are a measure of system efficiency, and the higher the number, the more efficient the product. Besides purchasing a new home comfort system, don’t forget about these additional factors:

      1. Is your system regularly maintained? Whether it’s a furnace or air conditioner, HVAC systems will work more efficiently after regular maintenance checks.
      2. Do you need a zoning system? If there are areas in your home that are rarely used, a zoning system will allow you to heat or cool only the most used areas of your house.
      3. Are you taking advantage of a programmable or smart thermostat? According to the U.S. Department of Energy, programmable thermostats may decrease your heating costs by up to 35 percent, and your cooling costs by up to 25 percent.

Zoning equipment gives you the opportunity to divide areas of your home and control the air differently in each area. Zoning tends to be best for when you have areas of your home that are seldom used or when you and your family are constantly in disagreement of what the temperature in each area of your home should be. Zoning systems are quiet and efficient, allowing you more control over the comfort of your house. Find out more about the equipment available from Fal-Ken Heating & Cooling Corporation.